DTF Transfers

22in x ~360in

DTF Transfers - Upload Gang Sheet

$316.80

Default Value13.65in x 13.53in2.1in x 0.96in9.84in x 13.65in8.97in x 6.54in6.17in x 3.46in11.16in x 6.25in

DTF TRANSFERS - Transfers By Size

From $0.00

22in x ~120in

DTF TRANSFERS - Build a Gang Sheet

$1,056.00

Heat Press Instructions

Warm /Cold Peel Film
Firm Pressure, Temperature: 250-270° F, Time: 10-12seconds

Preheat garment for 5 seconds to remove moisture
Place transfer on garment
Cover with Teflon Sheet or Parchment Paper
Apply design at 250-275°F
Use firm pressure for 12-15 seconds
Peel Cold
Cover transfer again with parchment paper
Post-press for 2-4 seconds to seal edge of transfer

Instant Hot Peel
Heavy Pressure, Temperature: 280-320° F, Time: 10-12seconds

Preheat garment for 5-seconds to remove moisture

Place transfer on garment

Cover with Teflon Sheet or Parchment Paper

Apply design at 290-320 F

Use firm pressure for 12-15 seconds

Peel Hot

Cover transfer again with parchment paper

Post-press for 2-4 seconds to seal edge of transfer

Heat Press Pressure Chart

Light pressure is usually between 25-30 psi if you’re using an automatic heat press. If you’re working with a manual heat press, light pressure means the upper platen will be easy to close with just one hand.

Medium pressure is usually between 32-38 psi if you’re using an automatic heat press. If you’re working with a manual heat press, medium pressure means the upper platen takes some effort to close. Typically, you can close it with two hands and some effort.

Firm pressure is usually 40 psi or higher if you’re using an automatic heat press. If you’re working with a manual heat press, firm pressure means the upper platen is difficult to close with two hands and a lot of muscle.

Our DTF Transfers Process

Upload Your Designs and Place Order Online

Use designs with unlimited colors, simple, or high detail artwork. Upload any design you want and we'll turn it into a high quality direct to film transfer

Ship within 24-48 hours

We Print Your Transfers

We make your transfer using our unique Hyper DTF transfer process. Creating the most detailed, highest quality, full color direct to film transfer you can find.

Keep Extras in Storage Forever

Heatpress when Ready.

Press your DTF transfer at 300°F. Medium pressure for 15 seconds. Peel after 5 seconds, hot or cool, and press again for ultimate durability.
* See our instructions above for materials *